Rockwell Automation 1732E-IB16M12SOEDR EtherNet/IP ArmorBlock supporting Sequence of Events - Manual (Page 40)

Publication 1732E-UM002A-EN-P - March 2010
32 Configure the Module Using RSLogix 5000
3. When the Select Module dialog appears, expand Communications and
select the new module. Select the 1756-EN2T EtherNet/IP Bridge.
4. The Select Major Revision dialog opens.
Select Major Revision 2 or later.
5. Configure the bridge. The first screen of the configuration wizard
opens.
The local 1756-EN2T communication module will communicate with the
1732E ArmorBlock module on EtherNet. Before you can communicate with
your module, you need to add it as a
slave of the 1756-EN2T communication
module. For more information about using 1756 controller and EtherNet/IP
products, see publication
ENET-UM001 .
A. Select the 1756-EN2T
EtherNet/IP Bridge.
B. Click OK.
A. Select the number of
major revision.
B. Click OK.
A. Name the bridge.
B. Enter the IP address.
C. Select slot 3 for the EtherNet/IP bridge.
D. Make sure the Minor Revision number
matches your module’s revision.
E. Choose an Electronic Keying method.
For more information, see page 49 .
F. Click OK.