Rockwell Automation 1738-AENTR Armorpoint 2 Port Enet Adapter - Manual (Page 5)

ArmorPoint I/O 2-Port EtherNet/IP Adapter, Series A 5
Publication 1738-IN028B-EN-E - February 2010
1738-AENTR Adapter, Series A
Before You Begin
To effectively use your adapter, note the following considerations.
Determine Compatibility
RSLogix 5000 version 17 or greater must be used for the 1738-AENTR’s
Add-on Profile. The 1738-AENTR adapters will accept I/O connections with
the electronic keying for the 1738-AENT. This allows the 1738-AENTR
adapter to be used in a daisy-chain topology with the 1738-AENT’s profile
used for the 1738-AENTR.
1738-AENTR
EtherNet I/P
Adapter
Status
Network
Activity
Network
Status
PointBus
Status
System
Power
Adapter
Power
conformance tested
™
PWR
IP ADDRESS
Link 2
Activity/
Status
Link 1
Activity/
Status
44830
M12
connectors
Auxiliary
Power
connector
Network
address
switches
Status
indicators