Rockwell Automation 1738-AENTR Armorpoint 2 Port Enet Adapter - Manual (Page 7)

ArmorPoint I/O 2-Port EtherNet/IP Adapter, Series A 7
Publication 1738-IN028B-EN-E - February 2010
Mount the Adapter and I/O Base
To mount the ArmorPoint I/O adapter on a wall or panel, use the screw holes
provided with the ArmorPoint I/O adapter.
Mounting illustration for the ArmorPoint I/O adapter with I/O bases
Follow the instructions to install the mounting base.
1. Lay out the required points as shown above in the drilling dimension
drawing.
2. Drill the necessary holes for M4 (#8) machine or self-tapping screws.
3. Mount the adapter using M4 (#8) screws.
IMPORTANT
The ArmorPoint I/O adapter must be mounted on a grounded metal
mounting plate or other conductive surface.
Adapter
102 mm
(4.0 in)
56 mm
(2.2 in)
46.25 mm
(1.8 in)
51.9 mm
(2.0 in)
20.1 mm
(0.8 in)
20.1 mm
(0.8 in)
51.9 mm
(2.0 in)
51.9 mm
(2.0 in)
44834