Rockwell Automation 1746-NR4 SLC 500 RTD/Resistance Input Module/ Instructions - Manual (Page 17)

SLC 500™ RTD/Resistance Input Module 17
Publication 1746-IN012B-EN-P - May 2001
Fi
lt
er
Fr
eq
ue
ncy
10 Hz 0 0
50 Hz 0 1
60 Hz 1 0
250Hz 1 1
Ena
bl
e
Ch
an
ne
l
Enable 1
Disable 0
Ex
ci
ta
ti
on
Cu
rr
en
t 2.0 mA 0
0.5 mA 1
Sc
al
in
g
Default 0 0
User-set (Range 0)
(6) 0 1
User-set (Range 1) (6) 1 0
Invalid 1 1
Unused 0
(1) Actual value at 0°C is 9.042 Ω per SAMA standard RC21-4-1966.
(2) Actual value at 0°C is 100 Ω per DIN standard.
(3) Values are in 0.1 degree/step or 0.1 Ω /step for all resistance input types, except 150 Ω . For the 150 Ω resistance type, the
values are in 0.01 Ω /step.
(4) Values are in 1 degree/step or 1 Ω /step for all resistance input types, except 150 Ω . For the 150 Ω resistance input type, the
values are in 0.1 Ω /step.
(5) This bit is ignored when a resistance device is selected.
(6) Applies to proportional counts data format selected using bits 4 and 5.
TIP
Ensure that unused bit 15 is always set to zero.
To Select
Make these bit settings
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0