Add the scanner to the i/o configuration folder – Rockwell Automation 1794-OB16D FLEX I/O Diagnostic Modules User Manual User Manual
Page 52
Advertising
Publication 1794-UM061A-EN-P - July 2006
50 Configure FLEX I/O Digital Modules on a DeviceNet Network
Add the Scanner to the I/O Configuration Folder
1. Right-click and choose New Module.
2. Choose the type of scanner.
3. Select the major revision of
the scanner.
ControlLogix, FlexLogix, and
SoftLogix5800 scanners
CompactLogix scanner
EtherNet/IP to DeviceNet
linking device
ControlNet to DeviceNet
linking device
Advertising
This manual is related to the following products: