Rockwell Automation 1794-OB16D FLEX I/O Diagnostic Modules User Manual - Manual (Page 72)

Publication 1794-UM061A-EN-P - July 2006
70 Configure Your Adapter and Digital Modules on a ControlNet Network
2. Click the Connection tab.
Notice that the connection request error is still present because we
haven’t scheduled any of the I/O module connections yet. You’ll do that
through RSNetWorx for ControlNet.
Schedule I/O Module
Connections
Use these procedures to schedule I/O module connections.
1. Start RSNetWorx for ControlNet.
2. From the File menu, choose New.
3. Click OK.
4. Choose Network>Online.