Rockwell Automation Arena Packaging Users Guide - Manual (Page 69)

4 • S TATISTICS
63
•
•
•
• •
4 • Statisti
cs
C OST
Equipment Operating Cost—This statistic reports the fixed operating cost of the palletizer
over its scheduled time. This statistic is calculated as follows:
Equipment Operating Cost = (Simulation Run Length – Total Time Stopped) * (Cost/Hour)
where
Simulation Run Length is the duration of the simulation run, Total Time Stopped is the reported
total time the palletizer was in scheduled stops, and Cost/Hour is the cost factor entered in the
Costs dialog box.
Cost of Good Product—This statistic reports the variable cost of processing good product
at the palletizer (i.e., adding good units to pallets or removing good units from pallets).
This statistic is calculated as follows:
Cost of Good Product = Total Good Units Produced * Cost/Good Unit
where
Total Good Units Produced is the reported total of good units processed by the palletizer, and
Cost/Good Unit is the cost factor entered in the Costs dialog box.
Cost of Lost Product—This statistic reports the variable cost of losing product at the
palletizer. This statistic is calculated as follows:
Cost of Lost Product = Total Units Lost * Cost/Lost Unit
where
Total Units Lost is the reported total of units lost at the palletizer, and Cost/Lost Unit is the cost
factor entered in the Costs dialog.
Cost of Layers Swept—This statistic reports the variable cost of layers added to or
removed from pallets. This statistic is calculated as follows:
Cost of Layers Swept = Total Layers Swept * Cost/Layer
where
Total Layers Swept is the reported total of layers added to or removed from pallets, and
Cost/Layer is the cost factor entered in the Costs dialog box.
Cost of Pallets (Un)Stored—This statistic reports the variable cost of pallets added to or
removed from storage. This statistic is calculated as follows:
Cost of Pallets (Un)Stored = Total Pallets (Un)Stored * Cost/Pallet
where
Total Pallets (Un)Stored is the reported total of pallets added to or removed from storage, and
Cost/Pallet is the cost factor entered in the Costs dialog.