Barco R9010310 User Manual
Page 23
Advertising
3. Installation Guidelines
Necessary tools
Flatblade screwdriver of 5mm or Nut driver 8mm
Installing the lamp unit
1. Remove the lock nut on the 3 spacer screws (A). (image 3-10)
2. Line up the lamp unit guides with the guides on the projector frame (B) and push the unit into the frame until it fits. (image 3-11)
3. Secure the position of the lamp unit with the 3 spacer screws. (image 3-12)
Image 3-10
Lamp unit, removing the lock nuts
R5976801 SLM R9+ 20/10/2004
19
Advertising