Barco R9010310 - Manual (Page 30)

3. Installation Guidelines
W ARNING : Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the
cloth.
Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.
C AUTION : Other lenses can also be cleaned safely with this Toraysee TM cloth.
3.8 Battery Installation in the RCU
How is the battery delivered ?
A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord.
How to install ?
1. Remove the battery cover on the backside of the remote control by pushing the indicated handle a little towards the bottom of
the RCU. (image 3-20)
2. Lift up the top side of the cover at the same time.image 3-20
3. Insert the new 9 V battery (type E-block or equivalent) in the lower compartment.
4. Connect the battery (B) to the contact plate (A). (image 3-21)
5. Insert the battery into the lower compartment and put the cover back.
6. Insert a overview card (C) in the back side.image 3-21
Image 3-20
Opening the battery cover of
the RCU
A
B
C
Image 3-21
Mounting the battery into the RCU
3.9 Stacking Projectors
What is possible?
Up to 3 projectors can be stacked on each other without using extra tools or accessories.
26 R5976801 SLM R9+ 20/10/2004