8 adjusting the black level of the images, Adjusting the black level of the images, Image 7-14) – Barco R9010310 User Manual
Page 88: Random access adjustment mode, 8 adjusting the black level of the images why, How to adjust
Advertising
7. Random Access Adjustment Mode
Image 7-14
Width set up for projector 2
7.5.8
Adjusting the black level of the images
Why
For dark images, the overlap zone will be brighter then the rest of the images. Therefore we can rise the black level of the remaining
image (excluding the overlap zone).
How to adjust?
1. Push the cursor key ↑ or ↓ to highlight Level. (menu 7-52)
2. Press ENTER to activate.
3. Adjust the black level of area A until the black level of area A, B and C are equal. (image 7-15)
SCENERGIX
STATUS [ON]
- size -
TOP
BOTTOM
LEFT
RIGHT
- black level -
LEVEL
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-52
RGB
Image 1
Image 2
A
C
B
112
113
111
R
G
B
Image 7-15
Black level adjustment
84
R5976801 SLM R9+ 20/10/2004
Advertising