Barco R9010310 - Manual (Page 28)

3. Installation Guidelines
TLD HB(2.8–5.0:1) R9842100
TLD HB(5.0–8.0:1) R9842120
Extra lenses for SLM R9+
The projector can also be equipped with TLD lenses. But when using these lenses, the light output of the projector will be lower.
TLD(1.6–2.0:1) R9840670
TLD(2.0–2.8:1) R9840680
TLD(2.8–5.0:1) R9840690
TLD(1.2:1) R9840770
TLD(0.8:1) R9840900
TLD(5.0–8.0:1) R9840910
3.7.2 Lens selection
How to select ?
1. Determine the required screen width.
2. Determine the approximate position of the projector in the projection room with regard to the screen and measure the projector-
screen distance (PD).
3. Use the lens formulas to find the best corresponding PD with regard to the measured projector-screen distance for the required
screen width.
3.7.3 Lens formulas
Formulas for the standard TLD HB lenses
Metric formulas (meter) Inch formulas (inch)
TLD HB(0.8:1) PD=0.77xSW+0.05 PD=0.77SW+1.97
TLD HB(1.2:1) PD=1.11xSW-0.01 PD=1.11xSW-0.39
TLD HB(1.6–2.0:1) PD
min
=1.47xSW-0.09
PD
max
=1.85xSW-0.13
PD
min
=1.47xSW-3.54
PD
max
=1.85xSW-5.12
TLD HB(2.0–2.8:1) PD
min
=1.85xSW-0.17
PD
max
=2.62xSW-0.24
PD
min
=1.85xSW-6.69
PD
max
=2.62xSW-9.45
TLD HB(2.8–5.0:1) PD
min
=2.58xSW-0.16
PD
max
=4.71xSW-0.38
PD
min
=2.58xSW-6.30
PD
max
=4.71xSW-14.96
TLD HB(5.0–8.0:1) PD
min
=4.52xSW-0.01
PD
max
=7.53xSW-0.29
PD
min
=4.52xSW-0.39
PD
max
=7.53xSW-11.42
Formulas for TLD lenses
Metric formulas (meter) Inch formulas (inch)
TLD(0.8:1) PD=0.77xSW+0.05 PD=0.77SW+1.97
TLD(1.2:1) PD=1.11xSW-0.01 PD=1.11xSW-0.39
TLD(1.6–2.0:1) PD
min
=1.47xSW-0.09
PD
max
=1.85xSW-0.13
PD
min
=1.47xSW-3.54
PD
max
=1.85xSW-5.12
TLD(2.0–2.8:1) PD
min
=1.85xSW-0.17
PD
max
=2.62xSW-0.24
PD
min
=1.85xSW-6.69
PD
max
=2.62xSW-9.45
24 R5976801 SLM R9+ 20/10/2004