Rockwell Automation 1440-TB-H XM-947 Dynamic Vibration Terminal Base - Manual (Page 16)

16 XM-947 Dynamic Vibration Terminal Base
Publication GMSI10-IN027A-EN-P - May 2010
13 Signal Common 39 Reserved
14 Signal Common 40 No Connection
15 Chassis 41 Chassis
16 No Connection 42 Chassis
17 No Connection 43 Chassis
18 No Connection 44 CAN_High (white wire)
19 Channel 1 Signal In 45 CAN_Low (blue wire)
20 Channel 1 Buffer Out 46 CAN Shield (bare wire)
21 Channel 2 Signal In 47 DeviceNet V (+) (red wire) (Optional,
see IMPORTANT note below)
22 Channel 2 Buffer Out 48 DeviceNet V (-) (black wire)
23 Channel 3 Signal In 49 No Connection
24 Channel 3 Buffer Out 50 No Connection
25 Channel 4 Signal In 51 No Connection
IMPORTANT
The DeviceNet power circuit through the XM module interconnect, which is
rated at only 300mA, is not intended or designed to power DeviceNet loads.
Doing so could damage the module or terminal base.
To preclude this possibility, even unintentionally, it is recommended that
DeviceNet V+ be left unconnected.
No. Description No. Description