Rockwell Automation 1440-TB-H XM-947 Dynamic Vibration Terminal Base - Manual (Page 5)

XM-947 Dynamic Vibration Terminal Base 5
Publication GMSI10-IN027A-EN-P - May 2010
IMPORTANT
Wiring to or from this device, which enters or leaves the system enclosure,
must utilize wiring methods suitable for Class I, Division 2 Hazardous
Locations, as appropriate for the installation in accordance with the product
drawings as indicated in the following table.
Model Catalog Number Haz Location Drawings*
w/o Barriers w/ Barriers
XM-120 1440-VST0201RA
48178-HAZ 48179-HAZ
XM-121 1440-VLF0201RA
XM-122 1440-VSE0201RA
XM-123 1440-VAD0201RA
XM-160 1440-VDRS0600RH
51263-HAZ 51264-HAZ
XM-161 1440-VDRS0606RH
XM-162 1440-VDRP0600RH
XM-220 1440-SPD0201RB 48640-HAZ 48641-HAZ
XM-320 1440-TPS0201RB 48238-HAZ 48239-HAZ
XM-360 1440-TPR0600RE
48295-HAZ 48299-HAZ
XM-361 1440-TUN0600RE
XM-361 1440-TTC0600RE
XM-440 1440-RMA0004RC 48240-HAZ N/A
XM-441 1440-REX0004RD 48241-HAZ N/A
XM-442 1440-REX0304RG 48642-HAZ N/A
* Drawings are available on the included CD