Rockwell Automation 1440-TB-H XM-947 Dynamic Vibration Terminal Base - Manual (Page 20)

20 XM-947 Dynamic Vibration Terminal Base
Publication GMSI10-IN027A-EN-P - May 2010
24 Channel 3 Buffer Out 50 Circuit Ground
25 Channel 4 Signal In 51 Circuit Ground
IMPORTANT
The DeviceNet power circuit through the XM module interconnect, which is
rated at only 300mA, is not intended or designed to power DeviceNet loads.
Doing so could damage the module or terminal base.
To preclude this possibility, even unintentionally, it is recommended that
DeviceNet V+ be left unconnected.
No Description No. Description