Status indicators – Rockwell Automation 1440-DYN02-01RJ XM Dynamic Measurement Module User Manual
Page 13
Advertising
XM Dynamic Measurement Module 13
Publication
ICM-IN002A-EN-P - March 2009
Status Indicators
The module has seven LED indicators on top of the module.
Indicator
State
Description
Module Status (MS)
Off
No power applied to the module.
Alternating
Red/Green
Module performing power-up self-test.
Flashing Red
• Application firmware is invalid or not
loaded. Download firmware to the
module.
• Firmware download is currently in
progress.
Solid Red
An unrecoverable fault has occurred. The
module may need to be repaired or
replaced.
Flashing Green
Module operating in Program Mode.
Solid Green
Module operating in Run Mode.
DYNAMIC MEASUREMENT
1440-DYN02-01RJ
Status Indicators
Advertising