Rockwell Automation 1440-DYN02-01RJ XM Dynamic Measurement Module - Manual (Page 14)

14 XM Dynamic Measurement Module
Publication ICM-IN002A-EN-P - March 2009
Network Status (NS) Off Module is not online.
• Module is autobauding.
• No power applied to the module;
look at Module Status LED.
Flashing Red One or more I/O connections are in the
timed-out state.
Solid Red Failed communications (duplicate MAC ID
or bus-off).
Flashing Green Module is online but no connections are
currently established.
Solid Green Module is online with connections
currently established.
Channel 0 &
Channel 1
Off • Normal operation within alarm limits
on the channel.
• No power applied to the module; look
at the Module Status LED.
Solid Yellow Alarm associated with this channel is in
Alert.
Solid Red Alarm associated with this channel is in
Danger.
Flashing Red A transducer fault exists on the channel.
DC bias is outside the DC Low and High
Limits.
Tachometer Off
• Normal operation within alarm limits
on the channel.
• No power applied to the module; look
at the Module Status LED.
Solid Yellow Alarm on Speed or Acceleration is in
Alert.
Solid Red Alarm on Speed or Acceleration is in
Danger.
Indicator State Description