Balboa Water Group Dolphin II - Manual (Page 31)

31
1.5 to 2.0 inches appart
90 angle
Original Remote
4. Press the learning key (e.g., Guide) twice. The
LED will blink twice after the second press.
5. To clear additional functions stored on
other learning keys, repeat steps 1 through 4
(in this section).
Feature Reset
This function will clear all volume lock and learned
key functions. It does not clear device codes and
mode reassignments.
1. On the Dolphin, press and hold SETUP until the
LED (red light) blinks twice, then release SETUP.
2. Enter 9 - 8 - 0. The LED will blink 4 times when
reset is complete..
NOTE: LEARNING SHOULD BE DONE INDOORS AND
AWAY FROM FLUORESCENT LIGHTS.
Original Remote LED
Dolphin Remote