Balboa Water Group Dolphin II - Manual (Page 6)

Use GUIDE to display the program guide.
Use EXIT to exit out of an on-screen menu
and guide.
Use the four directional keys to move the cursor in
the program guide and menu screens.
Use SELECT to
choose options, PPV
events, and to tune
programs from the
program guide.
Use INFO to display
current channel
and program
information.
Press MENU once to display an on-screen menu.
FEATURES AND FUNCTIONS
…Continued
INSTALLING BATTERIES
(See illustration on opposite page)
1. On the back of the Dolphin Remote, remove
the screws that hold the battery cover in place
and lift off the battery cover.
2 Obtain two (2) fully-charged AA
alkaline batteries.
Match the + and – marks on the batteries to
the + and – marks in the battery case, then
insert the new batteries.
3. Press the battery cover back into place, being
careful to align it with the rubber seal.
4. Replace the screws that hold the battery cover
by carefully starting each one without tightening
it. Once they are all started, snug up one
screw and then do the same to the screw on
the opposite side of the door. Repeat this in a
crossing pattern until all screws are snug.
Do not overtighten them. This will assure an
adequate water seal around the battery cover.
5. Test the unit by pressing any mode key (e.g.,
TV, VCR/DVD, CBL/SAT, RCVR, SPA, or CD).
If the batteries are inserted correctly, the LED
will blink once.
NOTE:
Whenever batteries need to be replaced, the
Dolphin LED will blink twice with every key
press. Simply replace the batteries and the
remote will be restored to its full functionality,
complete with your favorite settings.
6