Bendix Commercial Vehicle Systems EC-16 ANTILOCK CONTROLLER 4/08 - Manual (Page 27)

27
SECTION IX - TESTING FOR FALSE INDICATION CAUSED BY WHEEL SPEED COMPONENTS
START HERE
NO
YES
RUN VEHICLE AT 7 MPH OR MORE
FOR 5 SECONDS OR MORE. TURN
OFF IGNITION
REPEAT "INITIAL START-UP
PROCEDURE"
TURN THE IGNITION OFF AND INSPECT
APPROPRIATE AXLE AND WHEEL FOR
PRESENCE OF AN EXCITER OR TONE RING
AND SPEED SENSOR. CHECK SENSOR
“GAP” (DISTANCE BETWEEN SPEED
SENSOR AND EXCITER RING) AND
BEARING END PLAY. RE-ADJUST AS
NECESSARY.
WITH IGNITION ON, HOLD A
MAGNET ON RESET OF EC-16 ™
CONTROLLER AND NOTE LEDs
All LEDs
Illuminated?
Magnet
here
EC-16 ™ CONTROLLER
DIAGNOSTIC DISPLAY
ARE ALL LEDs ILLUMINATED?
REPLACE EC-16 ™
CONTROLLER
REMOVE MAGNET