Bendix Commercial Vehicle Systems SB-7 AIR DISC BRAKE - Manual (Page 21)

21
5.4 Bendix Diagnostic Equipment
The Bendix Diagnostic Unit ZB 9031 is a
hand held device suitable for vehicles that are fitted
with Bendix Air Disc Brakes using a continuous
signal type of Wear Potentiometer.
The wear condition of each brake can be measured
by connecting the device to a suitable 13 pin socket
(DIN 72570) where fitted. This socket must have
been connected to each sensor by the vehicle
manufacturer.
The Diagnostic unit permits:
-
Quick and simple wear check.
- A check of the potentiometer function.
A detailed instruction manual is included with
each unit.
5.5 Bendix Diagnostic Equipment
The Bendix Wear Check Module ZB 9033
is a chassis mounted device suitable for vehicles
that are fitted with Bendix Air Disc Brakes
using a continuous signal type of Wear
Potentiometer.
The module continuously monitors and displays the
wear at each brake.
For vehicles without an automatic brake control
system, particularly Trailer applications, the module
enables a quick and simple wear check.
The Wear Check Module permits:
- Up to six (6) Brakes to be checked together.
- LED monitoring of each Brake condition.
A detailed instruction manual is included with
each unit.