Bendix Commercial Vehicle Systems SB-7 AIR DISC BRAKE - Manual (Page 7)

7
1.4 Radial Disc Brake Repair Kits
CAUTION:
Use only Geniune Bendix parts
1.4.1 Radial Disc Brake Wear Indicator Kits
(Typical kits are shown below)
Type 1
Type 2
Type 4
Type 5
101 Sensor
102 Sensor
104 Cable Protection Plate
112 Clip
115 Spring Washer
116 Screw
117 Wear Indicator Cable
119 Bracket
120 Bracket
Type 3
Description Contents Association of Repair Kits to the Disc
Brakes and Repair Kit’s Order no.
Carrier Guide Kit 2, 4, 5, 31, 39, 40
Carrier Guide Kit (Steel Cap) 2, 4, 5, 10a, 31a, 39, 40
Wear Indicator Kit for variants see 1.2.1
(per axle) with or without 104
Guide Pins Kit 4-7, 9, 10, 31, 39, 40, 58
Guide Pins Kit (Steel Cap) 4, 5, 6, 7, 9, 10a, 31a, 39,
40, 58
Seal Kit for Guide Pins 9, 10, 31, 37, 58
Tappet and Boot Kit (2 pcs) 13, 161
Pad Set (per axle) 12, 26, 37, 44, 45 see www.Bendix.com for more
Adjuster Cap (4 pcs) 37 information
Pad Retainer Kit (per axle) 11, 26, 44, 45
Pad Retainer Kit (per axle) wear sensor 11, 26, 44, 45, 104, 115, 116
Kit for Rubber Sleeve 4, 6, 39 http://www.Bendix.com
Outer Guide Seal Kit (10 pcs) 10, 31
Repair Kit 5, 7, 9, 10a, 31a, 40, 58
Kit for Steel Cap 10a, 31a
Screw Kit for Steel Cap 10a, 31a, 39, 40
Screw Kit for Outer Boot 10, 31, 39, 40
Exchange Caliper r.h.
see Type plate
only in assembled condition
Exchange Caliper l.h.
on the Caliper
The following Repair Kits are available