Bendix Commercial Vehicle Systems SB-7 AIR DISC BRAKE - Manual (Page 9)

9
2 General Information
(for “Axial- and Radial Disc Brake”)
2.1 Service Tools
Part Number Description
ll 19252 Press-In Tool for Tappet and Boot (13)
ll 19253 Pull-In Tool for Inner Boot (9)
ll 19254 Pull-In/Out Tool for Brass Bushing (7)
II 32202 Wedged Fork for removal of Tappet and Boot (13)
II 36797 Grooving Tool for Brass Bushing (7)
Z001105 Press in Tool for Steel Cap (10a)
Item Number Torque spanner size
Ft. lbs. [Nm] in. (mm)
39 + 40 Caliper Bolts
M16x1.5 - 10.9 210±18 [285
±25
] 0.55 (14)
Actuator Mounting Nuts
M16x1.5 132+22 [180
+30
] 0.94 (24)
2.3 Lubrication
2.4 Torque requirements
2.2 Diagnostic Equipment
Part Number Description
ll 36695 ZB 9031 Hand held device for checking
Potentiometer function. ( Also Pad + Disc wear
when 13 pin chassis plug installed ).
ll 38691F ZB 9033 Chassis mounted device for measuring
Pad + Disc wear
Part Number Description Colour Application
ll 14525 Renolit HLT2 White 2) Brass Bushing (7)
II 32793 Syntheso GL EP1 Green 2) Rubber Bushing (6)
2) Important Note: The correct Grease MUST be used for each Bushing!
Service tool kit ZB 9032 II 37951/004EX contains the
tools listed as well as this Service manual. The
service video is available separately
as Part No. KBP2060/1, in the UK, and elsewhere as
RA-SB0002 EN.