Bendix Commercial Vehicle Systems SmarTire Trailer-Link Op Manual User Manual
Page 6
6
IMPORTANT NOTICE: PLEASE READ
To prevent sensor damage, when mounting and dismounting tires that
have SmarTire
®
TPMS tire sensors, be sure that the maintenance facility
is aware that a tire pressure monitoring system is installed.
If any rims are relocated or replaced, be sure to follow the SmarTire by
Bendix system guidelines to permit the system to re-learn the tire sensor
positions.
To monitor your trailer tires with your existing SmarTire by Bendix tractor
ECU, you must ensure that the SmarTire Trailer-Link
™
enable function
is set to ON in the SmarTire TPMS system tractor-mounted ECU (part
number 200.0216).
Additionally, for tractors equipped with ECU part number 200.0184, in order
for the ECU to be able to communicate with the SmarTire Trailer-Link ECU,
the ECU firmware MUST BE updated to new firmware. For instructions
on performing this update, please contact your Bendix account manager
or call 1-800 AIR-BRAKE (1-800-247-2725), option 2.