Bendix Commercial Vehicle Systems ACom Diagnostics V.6.7 - Manual (Page 13)

13
Configuration Screen
The Configura on screen provides the technician with the following informa on: ABS configura on, Load and Sensor,
TRSP (if equipped), ADL, AUX I/O and Broadcast op ons.
ABS Configura on
ABS Configura on provides the technician with the number of sensors and modulators the ECU is currently
configured to expect. Vehicle Data provides the technician with vehicle type, the number of axles, and the ECU
orienta on. Odometer displays the odometer, trip and service odometer. Tire size [RPM] / Tone Ring displays the
stored re size and tone ring size.
Figure 11
Load and Sensor Configuration
The Sensors field provides the technician with information on how the external load sensor (if equipped) is
configured. The Bogie Load field shows the expected weight for the rear axle − empty and fully loaded. The
Miscellaneous field shows the wheel track width and number of lift axles. The Lateral Acceleration Sensing field
provides whether the sensing type is internal or external (if equipped). The Load Sensing field displays the sensing
type (internal or external) and displays the detected air bag pressures.
Figure 12