Bendix Commercial Vehicle Systems ACom Diagnostics V.6.7 - Manual (Page 8)

8
2. The entry screen allows the technician to Start with ECU, if the technician knows which ECU they are
diagnosing. See Figure 4. Select from the list on the Starter screen and press the Start with ECU
button.
3. Alternatively, the program will detect the ECU. The screen will indicate which Bendix ECU was found
and the technician can select Launch to start Bendix ® ACom ® Diagnostics.
Figure 5
4. Any ECU can be displayed in the DEMO mode by pressing the Start in Demo mode button. The
Demo mode allows the technician to investigate the program’s features without communicating with
an actual ECU.
Figure 6