Bendix Commercial Vehicle Systems ACom Diagnostics V.6.7 - Manual (Page 35)

35
Bendix
®
ACom
®
Diagnostics 6.7 Adaptive Cruise w/Braking (ACB)
Refer to the Bendix Service Data sheet for the system under diagnosis for all cautions and warnings; certain
system changes (e.g. sensor position changes) require approval from Bendix Engineering.
Launch the Bendix ACom Diagnostics software and using the starter window, select Wingman (Adaptive
Cruise with Braking) diagnostics. In cases where the license key has been loaded into the Windows
®
registry, select Wingman Data Log in the starter window and the Wingman Data Log will be available.
If the license key is known, but not loaded, or the key is not known, contact the Bendix Tech Team at
1-800-AIR-BRAKE (1-800-247-2725) for assistance.
ACB Status-ACB Sensor
The ACB Data Log selection takes the technician, by default, to the ACB status screen. This screen
provides information about the system. The System Data field displays: model, software version, and
software part number. In the System Status field, the number of active Diagnostic Trouble Codes (DTCs)
will be displayed.
Figure 38
Control Buttons for ACB Status

• The DTC button will open the DTC window
• The Config button will open the Configuration window
• The Help button will open the Help page for ACB Status
• The Close button will close the window