Bendix Commercial Vehicle Systems ACom Diagnostics V.6.7 - Manual (Page 21)

21
Bendix® Trailer Roll Stability Program (TRSP) (If Equipped)
Note
: TRSP will be available only if the Electronic Control Unit (ECU) supports TRSP. This test will allow
the technician to check the TRSP sensor installation angle. To begin, the technician will need to select
“installation angle”, then press the Start/Next button to begin the test. Follow the prompts to run the test.
The program will prompt the technician by asking, “Did the ECU respond correctly?” The technician must
then acknowledge if the test was successful by selecting the green check mark indicating “yes”, or the red
circle with a line indicating “no.”
Figure 24
Miscellaneous
This test will allow the technician to evaluate the battery voltage, ABS indicator lamp, and AUX I/O
functions. The function will display the tests available which are supported by the ECU. The technician must
select which function(s) to check, then press the Start/Next button to start the test. Follow the prompts to
complete the evaluation. The program will prompt the technician by asking, “Did the ECU respond
correctly?” The technician must acknowledge by selecting the green check mark indicating “yes”, or the red
circle with a line indicating “no.”
Figure 25