Rp1210 adapters – Bendix Commercial Vehicle Systems ACom Diagnostics V.6.7 User Manual
Page 4
4
RP1210 Adapters
The Bendix
®
ACom
®
Diagnostic software relies on RP1210 compliant hardware adapters for
communication. A list of the recommended adapters is shown below.
NOTE: ACom
®
Diagnostics will remain in the demo mode unless there is at least one RP1210 driver
installed on the computer.
What follows is a list of supported hardware adapters for the software.
Before using this software, verify that the driver (.dll) for the adapter to be used for communications
is already loaded on the computer and is the latest version available from the adapter manufacturer.
NAVCom/NAVLink
Volvo 88890020
Nexiq USB‐Link
Nexiq Bluetooth USB‐Link
Nexiq PLC Adapter
Noregon DLA+
Noregon DLA+PLC
Noregon UDIF PLC/J1708
JPRO DLA+PLC
Cummins Inline 5
Cummins Inline 6
Dearborn DPA4+
Dearborn DPA5
Dearborn PLC TestCon (may be available in a kit with DPA4+)
Note: Adapters that interface using serial or parallel ports to the laptop are no longer supported.