Blizzard Lighting ProKontrol MH(Rev A) - Manual (Page 4)

Page 4
ProKontrol MH Manual Rev. A © 2013 Blizzard Lighting, LLC
IMPORTANT SAFETY INSTRUCTIONS
• Please keep this User Guide for future use. If you sell the unit to
someone else, be sure that they also receive this User Guide.
• ALWAYS make sure that you are connecting to the proper voltage,
and that the line voltage you are connecting to is not higher than
that stated on the decal or rear panel of the fixture.
• This product is intended for indoor use only.
• To prevent risk of fire or shock, do not expose fixture to rain or mois-
ture.
• Make sure there are no flammable materials close to the unit while
operating.
• ALWAYS disconnect from the power source before servicing or re-
placing fuse and be sure to replace with same fuse size and type.
• DO NOT operate at ambient temperatures higher than 104°F (40°C).
• In the event of a serious operating problem, stop using the unit im-
mediately. NEVER try to repair the unit by yourself. Repairs carried
out by unskilled people can lead to damage or malfunction. Please
contact the nearest authorized technical assistance center. Always
use the same type spare parts.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Avoid direct eye exposure to the light source while it is on.
Caution! There are no user serviceable parts inside the unit. Do not open the
housing or attempt any repairs yourself. In the unlikely event your unit may re-
quire service, please contact Blizzard Lighting at [email protected].
1.5 Instructions on Our Instructions
We try to make these manuals easy to read and as fun as reading an instruc-
tion manual can be. Because there are buttons, switches, sliders and knobs
galore on most of our products, it makes sense to refer to things in a consistent
fashion. So, when you see text formatted in certain ways, it should say to you
“Hey! Look at me! I MEAN something, dammit!”
Special Text What It Means
LCD Text displayed on the fixture’s LCD control panel
<MENU> Button <X> to be pressed