Blizzard Lighting ProKontrol MH(Rev A) - Manual (Page 6)

Page 6
ProKontrol MH Manual Rev. A © 2013 Blizzard Lighting, LLC
Number Button/Fader/Connection Does...
1 NUMBER Buttons
Functions differently in different
modes.
2 FIXTURE Button
When activated, the 16 number but-
tons fixture selection.
3 MOVEMENT Button
When activated, the 16 number but-
tons built-in movements/macros.
4 SCENE Button
When activated, the 16 number but-
tons scene playback
5 CHASE Button
When activated, the 16 number but-
tons are for chase playback.
6 PAN/TILT Wheels
Functions differently in different
modes.
7 USB Port
Used for firmware updates and data
backup. FAT32 and FAT16 supported.
8 REC/ENTER Button REC/ENTER
9 MENUS/ESC Button MENUS/ESC
10 BLACKOUT/DEL Button BLACKOUT/DELETE
11 RUN MODE/SWAP Button RUN MODE/SWAP
12 LCD Screen LCD Screen
13 Faders Adjusts the DMX output value
14 DMX Out DMX Out (3-pin)
15 DC Input DC Input
16 Power On/Off Power On/Off
Number Buttons
• In CHASE mode, press a number button, the chase will be activated or
deactivated.
• In SCENE mode, press a number button, the scene will be activated or
deactivated.
• In MOVEMENT mode, press a number button, the movement will be
activated or deactivated.
• In FIXTURE mode, press a number button, a fixture will be selected or
deselected.
Faders
• In FIXTURE mode, move a fader to adjust the DMX output value.
Pan/Tilt Wheels
• In CHASE mode, PAN/TILT wheels are to adjust the chase speed and time
respectively.
• In SCENE mode, nothing defined in PAN/TILT wheels.
• In MOVEMENT mode, PAN/TILT wheels are to adjust the MOVEMENT
parameters.
• In FIXTURE mode, PAN/TILT wheels are to adjust the output values of PAN/
TILT.
2.4 Button and Fader Functions