Blizzard Lighting SnoKontrol (Rev B) - Manual (Page 12)

SNOKONTROL Manual Rev B.
Page 12
Copyright © 2010-2013 Blizzard Lighting, LLC.
ALL RIGHTS RESERVED
2. Press the <AUTO/DEL> button repeatedly until the Auto Trigger LED turns on.
3. Adjust the program speed using the SPEED fader and the fade time using the
FADE TIME fader.
4. Alternately, tapping the <TAPSYNC DISPLAY> button to change scenes. This is
useful for allowing fixtures to follow the beat of music, etc.
3.3.4 Check Program
1. Press and hold <PROGRAM> button until the PROGRAM LED blinks.
2. Use the <BANK UP>/<BANK DOWN> buttons to select the program bank to
review.
3. Press the <SCENES> buttons to review each scene individually.
3.3.5 Editing A Program
1. Press and hold <PROGRAM> button until the PROGRAM LED blinks.
2. Use the <BANK UP>/<BANK DOWN> buttons to select the program bank to
edit.
3. Select the desired fixture using the appropriate <SCANNER> button or <PAGE
SELECT> button.
4. Adjust and change fixture attributes using teh channel faders.
5. Press the <MIDI/ADD> button to prepare the save.
6. Select the desired <SCENES> button to save.
3.3.6 Copy A Program
1. Press and hold <PROGRAM> button until the PROGRAM LED blinks.
2. Use the <BANK UP>/<BANK DOWN> buttons to select the program bank to
review.
3. Press the <MIDI/ADD> button to prepare the copy.
4. Use the <BANK UP>/<BANK DOWN> buttons to select the program bank to
copy.
5. Press the <MUSIC BANK COPY> button to execute the copy. All LEDs on the con-
troller will blink to confirm. All 8 scenes in the program bank will be copied.
3.4 Chase Programming
A chase is created by using previously created scenes. Scenes become steps in a chase and can
be arranged in any order you choose. It is highly recommended that prior to programming chas-
es for the first time; you delete all chases from memory. See Delete All Chases for instruc-
tions.
3.4.1 Create A Chase
A Chase can contain 240 scenes as steps. The term steps and scenes are used interchangeably.
1. Press the <PROGRAM> button until the Program LED blinks
2. Press the <CHASE> (1-6) button to select which chase to program.
3. Use the <BANK UP>/<BANK DOWN> buttons to select a scene if needed.
4. Select the <SCENE> button corresponding to the scene you would like to insert.
5. Tap the <MIDI/ADD> button to store.
6. Repeat steps 3-5 to add additional steps to the chase. Up to 240 steps may be pro-
grammed.
7. Press and hold the <PROGRAM> button to save the chase.