Operating instructions, Vehicles – Bully Dog 40300 PMT advanced vehicle downloader, controller, monitor and gauge User Manual
Page 37
36
Intr
odu
ctio
n
Par
ts D
escription
PM
T In
sta
llati
on
Inte
rne
t U
pda
tes
App
end
ix
CHANGE VEHICLE:
The Vehicles Menu is only used for two reasons:
1. The PMT is being transferred to a new vehicle, in which case it is very important that you make sure that
the last vehicle was completely returned to stock before the transfer. The PMT will not work on the new
vehicle unless the last vehicle was returned to stock.
2. If the wrong vehicle is selected when performing an install on a new vehicle during the Setup Wizard,
you will have to use the Vehicles Menu to select the correct vehicle.
When you select a new vehicle type in the Change Vehicle Menu and intend to install a down-
load into the vehicle you will need to do so through the Install Download Submenu from the
Main Menu.
THE SD CARD MUST BE INSERTED IN THE SIDE OF THE PMT TO CHANGE VEHICLES.
‘06-’07 Dodge 5.9L Cummins
‘01-’05 GM 6.6L Duramax
Go Back
VEHICLES
‘06-’07 GM 6.6L Duramax
‘03-’07 Ford 6.0L Power Stroke
‘03-’05 Dodge 5.9L Cummins
to Main Menu
Use the large Up Down Buttons to move
between different vehicles.
To select a different vehicle, press the selec-
tion button that coincides with that vehicle
location.
Op
era
ting
Ins
tru
ctio
ns
OPERATING INSTRuCTIONS