Bully Dog 40300 PMT advanced vehicle downloader, controller, monitor and gauge - Manual (Page 63)

62
Intr
odu
ctio
n
Par
ts D
escription
PM
T In
sta
llati
on
Op
era
ting
Ins
tru
ctio
ns
App
end
ix
seCTION 3: THe UpDaTe pROCess
Once you have checked the version history and downloaded the PMT/Vehicle back to stock, if
needed, you are ready to perform the update to get the latest PMT software. Follow the process
listed below to update the PMT software to the latest version.
1. Remove the SD Card from the PMT and gather the SD Card Reader. Insert the SD Card into the SD Card Reader.
2. Plug the SD Card Reader into a PC that has the Update Agent installed and the latest PMT software version
downloaded. Note that the Update Agent will not automatically recognize the SD Card unless it is inserted
into the SD Card Reader before the SD Card Reader is plugged into a PC.
3. Allow the Update Agent at least 10-20 seconds to auto recognize the SD Card. Once the Update Agent
recognizes the SD Card and the Update Agent expands to display the software interface, highlight the PMT
displayed in the devices menu and select Update.
4. With the SD Card updated, first remove the SD card reader from the PC, then remove the SD card from the SD
card reader and return it to the PMT. Insert the SD Card into the SD Card slot on the PMT.
5. With the PMT docked to the PMT cradle turn the ignition to the on position, but do not start the engine.
6. On the PMT interface, navigate into the Main Menu and select the Update PMT Software sub menu.
7. Follow the screen prompts to update the PMT, do not unplug while performing the PMT update.
8. Once complete, depending on the change in version number, you may now need to install a download back
onto the vehicle.
INTERNET uPDATES
Inte
rne
t U
pda
tes