Calculated Industries 6215 - Manual (Page 11)

10 — Scale Master ® II – PC Interface
Windows 3.1 Installation
1. Select Run from the Start menu, and click Browse. Select the win31
folder and double-click on it, then find setup1.exe and double-click
on it.
2. Follow the instructions. See page 11, “About the Configuration
Menu,” for Configuration Settings.
DOS Installation
You must be in native DOS mode (not a DOS window in Windows) for
the installation and the driver to work properly.
1. If your computer starts with Windows, you will need to restart in
DOS mode. Go to Start, then Shut Down. Select “Restart in MS-
DOS Mode” and click OK.
2. After your computer has rebooted in DOS mode, change to your
CD-ROM drive by typing d: and pressing enter.
3. Next type cd dos and press enter to change to the Directory with the
DOS Install file. You should see a prompt similar to the following on
your screen: D:\DOS>
4. Now proceed with the installation by typing sm2pc.bat and follow
the on-screen instructions.
5. See page 11, “About the Configuration Menu,” for Configuration
Settings.
NOTE for AOL Users: If you plan to install this program in DOS
instead of Windows, please note that your AOL may periodically lock
up. In order to avoid this problem, make sure the “Start with Windows”
box in the Configuration Menu is not selected (page 11, “About the
Configuration Menu”
).
6215UG-E-G 9/2/03 2:38 PM Page 10