Calculated Industries 6215 - Manual (Page 8)

User’s Guide — 7
6. When installation is complete, the final menu will prompt you to
finish the setup. Check “Yes, Launch the program file”, then click
“Finish” in order to complete the installation process and start the
SM2 Interface program. Some computers may request to be
restarted at this time.
NOTE: If you do not launch the program file at this time, you can
start the program later by double-clicking the SM2 Connect icon on
your Desktop.
(continued)
6215UG-E-G 9/2/03 2:38 PM Page 7