Calculated Industries 6215 - Manual (Page 13)

12 — Scale Master ® II – PC Interface
TERMINATING SEQUENCE — The selections on the left side of
the Configuration Menu have to do with how your data is
transferred to your spreadsheet or other software program.
Currently, it is defaulted to “Enter,” which commands your cursor
to enter transferred data in a column of cells (down) or in a row
(to the right) in your spreadsheet, depending on your program’s
setup. You can change the way your cursor inputs, however,
by selecting the following settings:
• None—Does not move your cursor to the next cell
(this allows you to insert text, if desired).
• Right Arrow—moves your cursor to the right cell, in a row.
• Down Arrow—moves your cursor down to the cell below, in a
column.
• Down Arrow ( BidMan Pro Only)—if you are using the Bid-Man
Pro software program, you need to select this setting. Moves
your cursor down.
• Tab—moves cursor in the direction preprogrammed by your
software.
• Custom—Lets you add a fixed character (letters or numbers) to
the end of each measurement (e.g., square feet, etc.). A box
labeled “Custom String” will appear under Custom. Enter the
desired character here.
6215UG-E-G 9/2/03 2:38 PM Page 12