Calculated Industries 6215 - Manual (Page 9)

8 — Scale Master ® II – PC Interface
7. The SM2 Connect Configuration Menu will be displayed.
7a. If you are using the serial port connection, and no changes
need to be made to the defaults, then click OK to start the SM2
interface program.
7b. If you are using the USB adapter, select “USB” from the
Connection Menu, and check the AutoDetect USB checkbox. If
no changes need to be made to the defaults, then click OK to
start the SM2 interface program.
NOTE: To make changes to the Configuration Menu defaults, please
refer to the section entitled “About the Configuration Menu” on page
11.
(continued)
6215UG-E-G 9/2/03 2:38 PM Page 8