Calculated Industries 6215 User Manual
Page 18
User’s Guide — 17
Sending Counts
1.
Press the [COUNT] key to count the value.
2.
Press [RCL] [COUNT] to move this counted value to the main
display of your
SMII.
3.
Press [SET] to send this count to your PC.
4.
To reset the count, press [RESET] and [COUNT] at the same time.
Sending Values Stored in Memory
The Memory function allows you to add multiple values and send them
to your PC. To send rolled values:
1.
Roll the first value. Press [SET] [M+] to send this value to the
computer and store it in memory. The display will reset to “0.”
2.
Roll the next value. Press [SET] [M+]. This value is added to your
previous value in memory and sent to the computer.
3.
You can continue to add values. To send the total value stored in
memory, press [RCL] [M+] to recall the total on the main display.
Then press [SET] to send the value.
NOTE:
You cannot add dimensioned (rolled) and non-dimensioned
(counted) values together.
6215UG-E-G 9/2/03 2:38 PM Page 17