Chapter 2. i/port installation, Caution statements, Setup – ClearCube I/Port Users Guide User Manual
Page 17: Orientation and venting, Setup orientation and venting
•
7
Chapter 2. I/Port Installation
Caution Statements
Improper connection, mounting, or use of this product could result in component failure or
undesired interference. Read the following caution statements before setting up and operating
your I/Port.
Setup
•
Do not connect to AC power until all other connections are made, including the power
adapter. Connecting or disconnecting components or equipment on the back panel when
the I/Port is receiving AC power can cause power surges and damage the device.
•
Do not force a connector into its socket. If any undue resistance is encountered, ensure that
the connector is correctly oriented to the receptacle.
•
Do not attach the I/Port to a telephone jack or other powered network connection. This
will permanently damage the I/Port. This damage is not covered under the ClearCube
Technology limited warranty.
Orientation and Venting
•
Allow sufficient space around the I/Port for ventilation. Do not place the device in any
enclosure that restricts airflow around the device. Do not place any objects on the device.
Product environmental specifications are listed in
•
The I8020 and I8820 can be mounted horizontally or vertically. An optional mounting
bracket is available from ClearCube. Provide adequate clearance around the I/Port for
cooling.
•
The I8330 can be mounted horizontally or vertically. Provide adequate clearance around
the I/Port for cooling.
•
Mount I9420 I/Ports and I9440 I/Ports flat (that is, horizontally). A mounting bracket is
included with each I9420 and I9440. See "
Using the I94xx Mounting Bracket
for instructions about how to mount the bracket and for information about the minimum
clearance specifications.