Metrohm 748 DH Sample Changer - Manual (Page 15)

3.2 Remote control commands
748 DH Sample Changer
13
3.2.2 Description of the remote control commands
3.2.2.1 Stirer $G
Stirer.On True, False
&Stirer.On"True";..$G Switching the stirrer on.
&Stirer.On"False";..$G Switching the stirrer off.
3.2.2.2 GoTo $G
GoTo.Vessel 1...XXX, Home, Soak, Wash
Makro command which moves to the predefined beaker using the speeds
from branch "Init" (see 3.2.2.9):
- Moves to shift position (set in TiNet configuration), SpeedZSlow
- Moves to beaker position, SpeedXY
- Moves to Z = 0 (as defined in the rack definition file
..\bin\PW74xDef\748*r.def of TiNet) position.
3.2.2.3 GoAbove $G
GoAbove.Vessel 1...XXX, Home, Soak, Wash
Makro command which moves to the predefined beaker (without dipping)
using the speeds from branch "Init" (see 3.2.2.9):
- Moves to shift position (set in TiNet configuration), SpeedZSlow
- Moves to beaker position, SpeedXY
3.2.2.4 GoIn $G
GoIn.Vessel 1...XXX, Home, Soak, Wash
Makro command which moves to the lowest possible position in the prede-
fined beaker using the speeds from branch "Init" (see 3.2.2.10):
- Moves to shift position (set in TiNet configuration), SpeedZSlow
- Moves to beaker position, SpeedXY
- Moves to lowest possible Z position, Zmax. (defined in the corresponding
rack definition file), SpeedZ
3.2.2.5 GoToHome $G
Makro command which moves to home position, readjusting the Sample
Changer and using the speeds from branch "Init" (see 3.2.2.9):
3.2.2.6 WashElectrodes $G
WashElectrodes.Times 1...9999
Makro command which moves to wash position position, washes the elec-
trodes and uses the speeds from branch "Init" (see 3.2.2.9):
- Moves up to Z=0, SpeedZ
- Moves to wash position, SpeedXY
- Moves down to wash position, SpeedZ
- Switches pump on
- Moves down to lowest possible position Zmax, SpeedZSlow
- Switches pump off