Metrohm 872 Extension Module IC Pump - Manual (Page 23)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Assembly
872 Extension Module IC Pump
￭￭￭￭￭￭￭￭ 15
9 Inserting the detector(s) again and connecting it (them)
See manual for the IC instrument.
10 Restoring the loosened connections
￭ Reconnect the drainage tubings,
Possibly, a longer section of silicone tubing 6.186.020 must be
cut to fit and mounted (see also the manual for the IC instru-
ment).
￭ Connect the leak sensor (see manual for the IC instrument),
￭ Connect the USB cable,
￭ Connect the MSB cable,
￭ Plug in the mains cable.
3.4 Setting up the extension module next to the IC
instrument
1 Switching off the IC instrument
Switch the IC instrument off and disconnect the mains cable.
2 Mounting the base tray
￭ Tilt the extension module sideways and lay it down flat.
￭ Attach base tray.
￭ Tighten the washers and the cylinder screws (8-2) with a 3 mm
hexagon key (6.2621.100).