Metrohm 850 Professional IC Anion MSM-HC MCS Gradient - Manual (Page 63)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
850 Professional IC
￭￭￭￭￭￭￭￭ 53
1
3
2
3
4
5
6
7
8
2
1
Figure 27 MSM-HC – Connectors
1 Union nut 2 MSM-HC connecting piece 6.2835.010
3 Eluent inlet capillary
Labeled with Eluent. 4 Eluent outlet capillary
Labeled with Detector.
5 Rinsing solution inlet capillary
Labeled with H2O. 6 Rinsing solution outlet capillary
Labeled with Waste.
7 Regeneration solution outlet capillary
Labeled with Waste. 8 Regeneration solution inlet capillary
Labeled with H2SO4.
The PTFE capillaries firmly mounted on the MSM-HC are connected to the
other components of the IC system as follows:
Caution
As the PTFE capillaries are very soft, the pressure screws should not be
overtightened.
Flattened capillaries can be shortened with the help of a capillary cutter.