Figure 40, Removing the piston seal, Figure 41 – Metrohm 850 Professional IC Anion MSM-HC MCS Gradient User Manual
Page 92: Insert the piston seal into the tool
5.5 High pressure pump
■■■■■■■■■■■■■■■■■■■■■■
82
■■■■■■■■
850 Professional IC
1
2
Figure 40
Removing the piston seal
1
Piston seal
2
Tool for piston seal
Pin of the tool.
2 Inserting the new piston seal into the tool
Insert the new piston seal tightly by hand into the recess of the
sleeve of the tool for the piston seal (39-2). The sealing springs must
be visible from the outside.
1
2
Figure 41
Insert the piston seal into the tool
1
Tool for piston seal 6.2617.010
Sleeve for inserting the new piston seal.
2
Piston seal
Order number: 6.2741.020
3 Inserting the new piston seal into the pump head
Guide the sleeve of the tool for the piston seal (39-2) with inserted
piston seal into the pump head and press the seal with the wide end
of the tool for the piston seal (39-1) into the pump head recess.