Metrohm 812 Valve Unit - Manual (Page 22)

4.2 Standard equipment
812 Valve Unit
19
4.2 Standard equipment
Subject to changes !
All dimensions are given in mm.
The 812 Valve Unit is available in two versions:
• 2.812.0010 Valve Unit with 1 valve
• 2.812.0020 Valve Unit with 2 valves
These instruments include the following parts:
Quant. Order No. Description
2.812.0010 2.812.0020
1 - 1.812.0010 Valve Unit with 1 valve
- 1 1.812.0020 Valve Unit with 2 valves
1 1 6.1803.020 PTFE capillary
Length L = 5 m
1 1 6.1825.210 Sample loop aus PEEK (20 µ L)
for injection valve; incl. 2 PEEK
compression fittings (6.2744.010)
1 1 6.1831.010 PEEK capillary
Length L = 3 m
Diameter d = 0.25 mm
1 1 6.2122.0X0 Mains cable
to customer's specifications:
Cable socket Cable
connector
Type IEC 320/C 13 Type SEV 12 (CH … )............................... 6.2122.020
Type IEC 320/C 13 Type CEE (7), VII (D … )........................... 6.2122.040
Type CEE (22), V Type NEMA 5-15 (USA … ) ...................... 6.2122.070
1 2 6.2128.100 Connecting cable
For connection 812 – 762/817
1 1 6.2152.000 Power supply unit
1 2 6.2744.010 PEEK compression fitting
For the connection of 6.1831.010 PEEK
capillaries or 6.1803.020 PTFE capillaries,
set of 5
26