Metrohm 816 IC Eluent Selector User Manual
Page 21
3.2 Operation via «IC Net»
Aliases
In the
Aliases
register card of the
816 IC Eluent Selector
window you can
freely define names for connections "A", "B" 5 and "C" 7 of the 816 IC
Eluent Selector.
Flow A
You can rename
Eluent A
.
Flow B
You can rename
Eluent
B
.
Flow C
You can rename
Eluent C
.
The names of the eluents entered here replace the default names
Eluent
A – C
in all the register cards of the
816 IC Eluent Selector
window.
Program
On the register card
Program
in the
816 IC Eluent Selector
window you
can enter a user-specific time program. Depending on the settings
made in the
Start mode
window (for details see Section 4.4.3
8.110.8223 Instructions for Use for the Metrodata «IC Net 2.1» soft-
ware) the program will be started automatically at the start of the de-
termination (
Start with determination
) or when the sample is injected (
Start
with inject
, in this case the
Enabled
checkbox must be activated).
816 IC Eluent Selector/ 8.816.1003 Instructions for Use
15