Metrohm 816 IC Eluent Selector User Manual
Page 22
3 Operation
Time (Column 1)
Time for command to be executed.
Range:
0.0 ... 999.9 min
If no time is entered then the command will be
carried out together with the last command for
which a time has been entered.
Command (Column 2)
Switches the IC Eluent Selector to the required
eluents. The alias names entered above will be
shown for selection.
ENABLED
Program for program start is activated (if a pro-
gram is not activated it will not start).
<
Add
>
Adds new program command.
<
Delete
>
Deletes selected program command.
<
Verify
>
Checks time program (any fault will produce an
error message).
Links
The register card
Links
of the
816 IC Eluent Selector
window is used to se-
lect the serial RS 232 interface (for details see 8.110.8223 Instructions
for Use for the Metrodata «IC Net 2.1» software).
816 IC Eluent Selector/ 8.816.1003 Instructions for Use
16