Metrohm 930 Compact IC Flex Oven/SeS/Deg - Manual (Page 106)

7.12 Detector
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
98 ￭￭￭￭￭￭￭￭
930 Compact IC Flex Oven/SeS/Deg (2.930.2460)
7.12 Detector
You can find the technical specifications for the detector in the detector's
manual.
7.13 Sample degasser
Material Fluoropolymer
Resistance to sol-
vents No restriction (except PFC)
Time to establish
vacuum < 60 s
7.14 Power connection
Required voltage 100 - 240 V ± 10% (autosensing)
Required fre-
quency 50 - 60 Hz ± 3 Hz (autosensing)
Power consump-
tion ￭ 65 W for typical analysis application
￭ 25 W standby (conductivity detector to 40 °C)
Power supply unit ￭ Up to 300 W maximum, electronically monitored
￭ Internal fuse 3.15 A
7.15 Interfaces
USB
Input 1 USB upstream, type B (for connection to the PC)
Output 2 USB downstream, type A
MSB 2 MSB Mini DIN 8-pin (female) (for Dosino, stirrer, remote lines, etc.)
Detector 1 15-pin high density DSUB (female)
Column recogni-
tion for an intelligent column
Leak sensor 1 jack plug
Further connec-
tions
Auxiliary 1 15-pin DSUB (female)
Service 1 15-pin DSUB (female)