Metrohm 930 Compact IC Flex Oven/SeS/Deg - Manual (Page 75)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Operation and maintenance
930 Compact IC Flex Oven/SeS/Deg (2.930.2460)
￭￭￭￭￭￭￭￭ 67
￭ Has the pressure dissipated?
￭ Is the instrument switched off?
1 Release the coupling from the pressure screw and seal it with a stop-
per.
2 Unscrew and remove the pressure screw on the pump head's output
(16-8).
3 Unscrew and remove the four fastening screws (16-3) using the hex
key.
4 Remove the pump head (16-4).
Replacing the piston seal
Carry out the following work on both pistons in turn.
Servicing a piston consists of the following tasks:
1. Replace the piston seal.
2. Optional: Clean or replace the zirconium oxide piston.
3. Reinstall the piston.