Figure 12, Exchanging the sample loop – Metrohm 930 Compact IC Flex Oven/SeS/Deg User Manual
Page 35
Advertising
■■■■■■■■■■■■■■■■■■■■■■
3 Installation
930 Compact IC Flex Oven/SeS/Deg (2.930.2460)
■■■■■■■■
27
Figure 12
Exchanging the sample loop
1
Pressure screw
Fastened to Port 6.
2
Sample loop
3
Pressure screw
Fastened to Port 3.
Exchanging the sample loop
1 Removing the existing sample loop
■
Unscrew the pressure screws (6.2744.010) at Port 3 and Port 6.
■
Remove the sample loop.
2 Installing a new sample loop
■
Fasten one end of the sample loop to Port 3 using a PEEK pres-
sure screw (6.2744.010).
■
Use the second PEEK pressure screw (6.2744.010) to fasten the
other end of the sample loop to Port 6.
Advertising