Metrohm NIRS XDS MultiVial Analyzer - Manual (Page 48)

46 ▪▪▪▪▪▪▪
is shown with a circle here, for clarity in “black and white”.)
The “Edit” box appears as shown. Click on “Edit”, then type the sample name into the vial position.
Press “Enter”. The Sample ID will also be shown in the table at right, as shown below:
Vision fills in the “Order” column, in the entry sequence of sample ID. Note the “1” in the Order
column. Another sample name is filled in as shown below:
Continue to enter sample names in this manner, until all 20 positions are filled. Note that the vial
positions become yellow when active, and the sampling order is incremented in the “Order” column.
Do not click on the vial position and turn it white – that removes it from the “Order” column, and de-
activates sampling on that vial.
Entry Method 2: Double-click on the upper part of the vial position, which brings up the box
shown:
The Sample ID may be typed into this box. Press “Enter” when finished.
While entering Sample IDs, the user may verify or change the Product ID. To do this, double-click on
the vial position below the center of the circle.
This shows the available products, with the selected product highlighted. If the user wishes to save a
given sample to a different product, it may be set using this screen. The Product ID will be updated in